This vandal proof model combines our sleek high/low 107-16 fountain with a vandal proof bottle filler (along with other vandal proof features) and a chiller/purifier in the cabinet below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features seamless double bowls. The chiller stores (2) gallons of chilled/purified water (serving a population of 100. The Taste Master® water purifier with carbon block element removes particles, tastes, odors and water-borne pathogens. Matching key-lock access door provides chiller/purifier access and security. Durable and beautiful, these fountains, cover plates and access panels are available in a wide range of finishes and options including "Hands Free".
Select Your Configuration Options:
The Model FCC-107-16-HL-VP-LS is a vandal proof wall-mounted dual bowl drinking water fountain with a cane apron. The 16” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier and chiller are located behind access panel directly below fountain.
Filtrine’s FCC-107-16-HL-VP-LS fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
Receptor: 16 ga, 16” diameter seamless bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius
Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile
Support Arm: 4-3/8” wide by 8-1/2” high — in 14 gauge
Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 31-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate: 16 ga stainless steel or bronze, 32″W x 3/8″D x 21″H, fits over mounting plate, secured by fountain arm
Purifier: Taste Master Purifier
Chiller: Wall-insert Model 56A chiller with 2 gallons storage, charged with HFO R513A “Ozone Safe – Low GWP” refrigerant
Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws
- Filtrine Drinking Water Equipment Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- FCC-107-16-HL-VP-LS Specification Sheet
- Filtrine Fountain Chiller Inserts
- Filtrine Model FC/FCC Drinking Fountain Alternative Installation