This vandal proof model combines our sleek high/low 107-16 fountain with a vandal proof bottle filler (along with other vandal proof features) and a chiller/purifier in the cabinet below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features seamless double bowls. The chiller stores (2) gallons of chilled/purified water (serving a population of 100). The Taste Master® water purifier with carbon block element removes particles, tastes, odors and water-borne pathogens. Matching key-lock access door provides chiller/purifier access and security. Durable and beautiful, these fountains, cover plates and access panels are available in a wide range of finishes and options including "Hands Free".
Select Your Configuration Options:
The Model FCC-107-16-HL-VP is a vandal proof wall-mounted dual bowl drinking water fountain. The 16” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier and chiller are located behind access door directly below fountain.
Filtrine’s FCC-107-16-HL fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
Receptor: 16 ga, 16” diameter seamless bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius
Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile
Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge
Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 31-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate: 16 ga stainless steel or bronze, 32″W x 3/8″D x 21″H, fits over mounting plate, secured by fountain arm
Purifier: Taste Master Purifier
Chiller: Wall-insert Model 56A chiller with 2 gallons storage, charged with HFO R513A “Ozone Safe – Low GWP” refrigerant
Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws
To download drawings, visit the Filtrine Model FCC-107-16-HL-VP CADdetails page. 2D file formats include: 2D DWG, DWF, DXF, PDF (CAD), VWX. 3D file formats include: RFA, SketchUp.
- Filtrine Drinking Water Equipment Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- FCC-107-16-HL-VP Specification Sheet
- Filtrine Fountain Chiller Inserts
- Filtrine Model FC/FCC Drinking Fountain Alternative Installation
Civic & Culture
Unlimited finish options and colors ensure that the Filtrine drinking fountains/bottle filling stations in your building or museum will have the same aesthetic quality and beauty as the décor or the artifacts being displayed. Filtrine’s drinking fountains and bottle filling stations are architecturally designed and the most durable in the industry. No other manufacturer offers a wider variety of drinking fountain/bottle filling station models and materials, including solid bronze. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
Gym Water Fountains
Filtrine has long been the brand of choice for several national gym chains because of the proprietary drinking water chiller/purifier design (Model FC and FCC). The growing popularity of water bottle refilling at gyms increases the likelihood of peak demand times (multiple users filling their bottles before and after fitness classes). Filtrine drinking water chillers feature an immersion coil evaporator that allows for storage of a large volume of chilled water. Vandal proof and “Hands Free” models cut down on tampering and germ transmission.
Colleges & University Water Fountains
Filtrine drinking fountains/bottle filling stations can meet and exceed LEED, Living Building Challenge (LBC) Red List and other green architectural requirements. Sustainability is especially important to higher education. Many colleges and universities looking to reduce bottled water waste and energy costs. All Filtrine drinking fountains/bottle filling stations are available with “Hands Free” and manual water bottle filler options to allow for the use of refillable bottles. Additionally, Filtrine drinking water chillers utilize immersion coil evaporators which provide a higher capacity of chilled drinking water while saving energy over traditional cooling technologies.
Hotel & Retail Water Fountains
The ability to match any décor makes the durable, beautiful Filtrine drinking fountains/bottle filling stations a dramatic feature either indoors or outdoors. Filtrine’s drinking water equipment graces hotel lobbies and retail outlets across the US and overseas. Whether the building is modern or historic, the wide variety of models, materials and finishes including bronze, stainless steel and more, are popular with architects and engineers. Operations are a breeze with “Hands Free”, vandal proof, electric water cooler and access panel options.
Office & Headquarters
Your office or headquarters interior design will be enhanced by a stylish and beautiful Filtrine drinking fountain and/or bottle filling station that can either blend into the background or stand out as an architecturally pleasing fixture. When Filtrine office building drinking water dispensing equipment is installed, employees are able to refill their personal bottles or glasses with chilled lead-free, great tasting water. Any Filtrine office drinking fountain/bottle filling station can be made “Hands Free”.
Filtrine offers a wide variety of drinking fountains and bottle filling stations that can be installed outdoors in parks and public spaces. This makes it easy to find the appropriate style of outdoor drinking fountain or bottle filling station model for arts and historic districts, downtowns and public squares. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
The wide variety of Filtrine drinking fountain and bottle filling station bronze finishes enhance many church, mosque or temple’s interior design. Filtrine’s unique solid bronze drinking fountains/bottle filling stations have long been sought by national religious institutions. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”. To deliver chilled fresh tasting purified water to multiple Filtrine drinking fountains/bottle filling stations, Filtrine remote chiller/purifiers are installed. They are hidden away behind the wall or in the ceiling.