Filtrine FCC-107-16-HHL-VP High/High/Low Drinking Fountain
Wall-Mounted, Triple Bowl, Tamper Resistant, Purifier/Chiller
This vandal proof model combines our sleek high/high/low 107-16 fountain with a vandal proof bottle filler (along with other vandal proof features) and a chiller/purifier in the cabinet below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features seamless triple bowls. The chiller stores (2) gallons of chilled/purified water (serving a population of 100). The Taste Master® water purifier with carbon block element removes particles, tastes, odors and water-borne pathogens. Matching key-lock access door provides chiller/purifier access and security. Durable and beautiful, these fountains are available in a wide range of finishes and options including "Hands Free".
Select Your Configuration Options:
Specifications:
The Model FCC-107-16-HHL-VP is a vandal proof wall-mounted triple bowl drinking water fountain. The 16” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier and chiller are located behind access panel directly below fountain.
Filtrine’s FCC-107-16-HHL-VP fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
Details
Receptor: 16 ga, 16” diameter seamless bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius. ADA compliant with 18″ projection from cover plate to rim
Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile
Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge
Mounting Plate: 1/4” steel plate, 51 1/2″W x 20-1/2″H, and 3/8” steel tongues projecting into support arms
Cover Plate: 16 ga stainless steel or bronze, 52″W x 3/8″D x 21″H, and fits over mounting plate, secured by fountain arms
Purifier: Taste Master Purifier
Chiller: Wall-insert Model 56A chiller with 2 gallon storage, charged with HFO R513A “Ozone Safe – Low GWP” refrigerant
Videos
Downloads
- Filtrine Drinking Water Equipment Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- FCC-107-16-HHL-VP Specification Sheet
- Filtrine Fountain Chiller Inserts
- Filtrine Model FC/FCC Drinking Fountain Alternative Installation
