Filtrine 107-16-HHL-VP-TM High/High/Low Drinking Fountain

Wall-Mounted, Triple Bowl, Tamper Resistant, Purifier

107-16-HHL-VP-TM

The vandal proof Filtrine Model 107-16-HHL is a high/high/low fountain with tamper proof features that dispenses Taste Master® purified water.  Based on Filtrine’s popular 107-16-HL model, this model has an additional drinking bowl for more capacity making it particularly suited for high-traffic locations. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features a seamless triple bowl design with a welded rim, which is ground and polished to a finely tapered edge. Durable and practical, these fountains are available in a wide range of finishes and options including "Hands Free".

Select Your Configuration Options:

Options

Fountain Controls, Bottle Fillers, Cover Plates, Tamper-resistant, etc.

Stainless Steel Finishes

Bronze Finishes

Specifications:

The Model 107-16-HHL-VP-TM is a vandal proof wall-mounted triple bowl drinking water fountain. The 16” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The  Filtrine Taste Master water purifier is located behind access panel directly below fountain.

Filtrine’s 107-16-HHL-VP-TM fountain  meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.

Details

Receptor: 16 ga, 16” diameter seamless bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius

Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile

Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge

Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 51-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability

Cover Plate: 16 ga stainless steel or bronze, 52″W x 3/8″D x 21″H, and fits over mounting plate, secured by fountain arm

Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws

Related Models

Related Applications