Filtrine 107-14-VP-TM Drinking Fountain
Wall-Mounted, Single Bowl, Tamper Resistant, Purifier
This vandal proof model combines our classic 107-14 fountain with other vandal proof features and Taste Master® water purifier in the cabinet below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain bowl design features a 1/8" rolled edge and concealed seam. The Taste Master® 0.5 micron carbon block element removes lead, particles, tastes, odors and water-borne pathogens. Matching key-lock access door provides chiller/purifier access and security. Durable and practical, these fountains are available in a wide range of finishes and options including "Hands Free".
Select Your Configuration Options:
The Model 107-14-VP-TM is a vandal proof wall-mounted drinking water fountain. The 14” diameter 16 ga. round bowl has an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier is located behind access panel directly below fountain.
Filtrine’s 107-14-VP-TM fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
Receptor: 14” diameter with 1/8” radius rolled edge and concealed seam — in 16 gauge
Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile.
Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge
Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 31-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate: Made of 16 ga stainless steel or bronze, 16″W x 3/8″D x 36″H, and fits over mounting plate, secured by fountain arm.
Purifier: Taste Master Purifier
Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws
- Filtrine Drinking Water Equipment Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- 107-14-VP-TM Specification Sheet
Filtrine FCC-107-14-HL-VP High/Low Drinking FountainWall-Mounted, Dual Bowl, Tamper Resistant, Purifier/Chiller
Filtrine FC-107-14-HHL-VP High/High/Low Drinking FountainWall-Mounted, Triple Bowl, Tamper Resistant, Purifier/Chiller
Filtrine FCC-107-14-HHL-VP High/High/Low Drinking FountainWall-Mounted, Triple Bowl, Tamper Resistant, Purifier/Chiller
Filtrine 107-14-HHL-VP-TM High/High/Low Drinking FountainWall-Mounted, Triple Bowl, Tamper Resistant, Purifier
Filtrine VPBF-RFK Vandal Proof Water Bottle Filler Retrofit Kit for Single Bowl Drinking FountainsWall-Mounted, Single Bowl, Vandal Proof, Retrofit
Filtrine VPBF-RFK-HL Vandal Proof Water Bottle Filler Retrofit Kit for High/Low Drinking FountainsWall-Mounted, Dual Bowl, Vandal Proof, Retrofit
Filtrine 107-14-VP-TM Drinking FountainWall-Mounted, Single Bowl, Tamper Resistant, Purifier
Filtrine FC-107-14-VP Drinking FountainWall-Mounted, Single Bowl, Tamper Resistant, Purifier/No-Fan Chiller
Filtrine FCC-107-14-VP Drinking FountainWall-Mounted, Single Bowl, Tamper Resistant, Purifier/Chiller
Filtrine 107-14-HL-VP High/Low Drinking FountainWall-Mounted, Dual Bowl, Tamper Resistant
Filtrine FC-107-14-HL-VP High/Low Drinking FountainWall-Mounted, Dual Bowl, Tamper Resistant, Purifier/No-Fan Chiller
Filtrine 107-14-HL-VP-TM High/Low Drinking FountainWall-Mounted, Dual Bowl, Tamper Resistant, Purifier
Civic & Culture
Unlimited finish options and colors ensure that the Filtrine drinking fountains/bottle filling stations in your building or museum will have the same aesthetic quality and beauty as the décor or the artifacts being displayed. Filtrine’s drinking fountains and bottle filling stations are architecturally designed and the most durable in the industry. No other manufacturer offers a wider variety of drinking fountain/bottle filling station models and materials, including solid bronze. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
Gym Water Fountains
Filtrine has long been the brand of choice for several national gym chains because of the proprietary drinking water chiller/purifier design (Model FC and FCC). The growing popularity of water bottle refilling at gyms increases the likelihood of peak demand times (multiple users filling their bottles before and after fitness classes). Filtrine drinking water chillers feature an immersion coil evaporator that allows for storage of a large volume of chilled water. Vandal proof and “Hands Free” models cut down on tampering and germ transmission.
Colleges & University Water Fountains
Filtrine drinking fountains/bottle filling stations can meet and exceed LEED, Living Building Challenge (LBC) Red List and other green architectural requirements. Sustainability is especially important to higher education. Many colleges and universities looking to reduce bottled water waste and energy costs. All Filtrine drinking fountains/bottle filling stations are available with “Hands Free” and manual water bottle filler options to allow for the use of refillable bottles. Additionally, Filtrine drinking water chillers utilize immersion coil evaporators which provide a higher capacity of chilled drinking water while saving energy over traditional cooling technologies.
Hotel & Retail Water Fountains
The ability to match any décor makes the durable, beautiful Filtrine drinking fountains/bottle filling stations a dramatic feature either indoors or outdoors. Filtrine’s drinking water equipment graces hotel lobbies and retail outlets across the US and overseas. Whether the building is modern or historic, the wide variety of models, materials and finishes including bronze, stainless steel and more, are popular with architects and engineers. Operations are a breeze with “Hands Free”, vandal proof, electric water cooler and access panel options.
Office & Headquarters
Your office or headquarters interior design will be enhanced by a stylish and beautiful Filtrine drinking fountain and/or bottle filling station that can either blend into the background or stand out as an architecturally pleasing fixture. When Filtrine office building drinking water dispensing equipment is installed, employees are able to refill their personal bottles or glasses with chilled lead-free, great tasting water. Any Filtrine office drinking fountain/bottle filling station can be made “Hands Free”.
Filtrine offers a wide variety of drinking fountains and bottle filling stations that can be installed outdoors in parks and public spaces. This makes it easy to find the appropriate style of outdoor drinking fountain or bottle filling station model for arts and historic districts, downtowns and public squares. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
The wide variety of Filtrine drinking fountain and bottle filling station bronze finishes enhance many church, mosque or temple’s interior design. Filtrine’s unique solid bronze drinking fountains/bottle filling stations have long been sought by national religious institutions. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”. To deliver chilled fresh tasting purified water to multiple Filtrine drinking fountains/bottle filling stations, Filtrine remote chiller/purifiers are installed. They are hidden away behind the wall or in the ceiling.
School systems throughout the US have become concerned about lead in their buildings’ drinking water. Old pipes and untreated city water are the main issues. Filtrine has two ways for schools to remove lead from drinking water.
- Filtrine’s vandal proof drinking fountains, bottle filling stations and electric water coolers are popular because of their durability. Point of use drinking water chillers and purifiers can be added to drinking fountains and bottle filling stations to eliminate lead, organic tastes/odors, chlorine taste/odor and pathogens. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free” to cut down on germ transmission.
- Filtrine’s point of entry water filtration system uses pre-filters, purifiers and optional UV sterilizers. It delivers lead-free water throughout the school building. Visit Point of Entry Water Filtration Explained for more information.