Filtrine 107-14-HL-VP High/Low Drinking Fountain

Wall-Mounted, Dual Bowl, Tamper Resistant

107-14-HL-VP

This vandal proof model combines our classic high/low 107-14 fountain with multiple vandal proof options.  Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features seamless double bowls. Durable and practical, these fountains, cover plates and access panels are available in a wide range of finishes and options.

Select Your Configuration Options:

Options

Fountain Controls, Bottle Fillers, Cover Plates, Tamper-resistant, etc.

Stainless Steel Finishes

Bronze Finishes

Specifications:

The Model 107-14-HL-VP is a vandal proof wall-mounted dual bowl drinking water fountain. The 14” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The  Filtrine Taste Master® water purifier is located behind access panel directly below fountain.

Filtrine’s 107-14-HL-VP fountain  meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.

Details

Receptor: 14” diameter with 1/8” radius rolled edge and concealed seam — in 16 gauge

Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile.

Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge

Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 31-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability

Cover Plate: Made of 16 ga stainless steel or bronze, 16″W x 3/8″D x 21″H, and fits over mounting plate, secured by fountain arm.

Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws

Related Models