Filtrine’s dramatic Model 90 non-recessed drinking water fountains sport a distinctive box shape. These fountains may be made in virtually any material, but are normally manufactured in stainless, bronze, or polymer aggregate. Standard stainless or bronze fountains are made in 16 gauge. The "School Proof" models (which include a metal plate on the bottom of the fountain and a vandal proof bubbler) are available in even stronger 14 gauge. Standard and "School Proof" fountains both have a 14" projection and may be fitted with an optional goose neck bottle filler, Model CC-161 with push button or Model CC-153 with a lever valve. Model 90 fountains can be easily customized with a variety of safety and convenience features.
The Filtrine Model 90 drinking water fountain in the photo above is shown in satin finished stainless steel with an optional "Push Button" Model F-501 bubbler in a mirror finish. To be ADA-compliant, choose Filtrine's “Soft Touch” Bubbler Valve. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains.
The Model 90 is a wall-mounted drinking water fountain. The 12 5/8” width rectangle design holds a 10 1/2" 16 ga. round bow with an integral drain. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED.
Filtrine’s 90 fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.