Banner Image

Black Bar

black background


Banner Title
Filtrine Model ALC-C and ALC-X Alcove Drinking Water Fountains

Filtrine's Model ALC-C alcove drinking fountains make use of Filtrine's versatile non-recessed fountains, such as Filtrine classic Model 107-16 or Model 107-14, inset into the wall out of way of the corridor. Or consider adding a Model B103 water bottle filling station as shown in the ALC-X drawing in the engineering bulletin. Either way, you can serve drinking water without sacrificing space. Filtrine alcoves also provide a viable solution to a widespread problem, how to convert existing fountains to meet ADA requirements within a reasonable budget. 

bold description

The Filtrine Model ALC-C alcove and 107-14 fountain in the photo above are shown in stainless steel with #4 satin finish and the mirror finish “Push Button” bubbler. Specify the heights based on your requirements. ADA options are available.



Each Model ALC-C or ALC_X is constructed with one-piece construction without seams, exposed edges or screws. The 107-16  or 107-14 stainless steel or bronze round bowl has an integral drain. All are available with limitless finish options, and customized logos. Filtrine alcoves are available pre-fabricated for 'push·in' installation, or you may fabricate your own on·site. Alcoves can hold any non-recessed Filtrine fountain, see list below.


Filtrine Model (107-14, 107-16, 90, or 90MOD) non-recessed fountain bowl or B103 bottle filling station
Mounting Plate
1/4” steel plate 10-3/4” high for vertical strength, 15-3/4” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability (107-14 and 107-16 models only)
Standard Features
Semi-circular alcove (depth of 15" or 18"), semi-hexagonal alcove (depth of 15 or 18"), or double width semi·circular design to hold two fountains (depth of 15" or 18")

V Engineering Bulletin

Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.

Drinking Water Finish Guide

Stainless Steel finishes


Filtrine Drinking Water Mirror Stainless Finish


Filtrine Drinking Water Satin Stainless Finish

*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.

Stainless Steel Unlimited Powder Coat Color Options (examples shown on Filtrine Model 103 water bottle filing stations)

Filtrine Bottle Filling Station Powder Coat Colors

Bronze finishes


Filtrine Drinking Water Mirror Bronze Finish


Filtrine Drinking Water Satin Bronze Finishe


Filtrine Drinking Water Statuary Bronze Finish

Oil Rubbed

Filtrine Drinking Water Oil Rubbed Bronze Finish

As the finish samples shown above are only pictorial representations, Filtrine will be happy to send you a complimentary set of actual samples to help you with your design plans. Call 800-930-3367, use the contact form or email to order today.

Filtrine Drinking Fountains Finishes Sample Kit
Provide chilled fresh water from your filtrine water fountain with point of use electric water coolers or remote central chillers along with the appropriate filtration system for your application. Add bowls as needed for higher volume applications.

Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.

Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.

Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.

Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.

Customize your Filtrine drinking fountain with the following options.

1. The fountain controls are available in four different fixture options and can be made vandal proof. Select from stainless steel or bronze material, mirror finish (standard with stainless steel) or fixtures can be finished to match the bowl/cover plates.

2. Water bottle and glass fillers come in multiple configurations including vandal proof. Select from stainless steel in a mirror finish, or fixtures can be finished to match the bowl/cover plates.



Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler, shown installed into Model 107-14 fountain cover plate

Option Thumbnail
Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler



Filtrine Drinking Water Bottle Counter with reflective LCD display with 8 large [8mm] digits, choice of four counter types, and more

Option Thumbnail
Filtrine Drinking Water Bottle Counter



Filtrine Model VPA "Vandal-Proof" Water Bottle Filler with "Soft-Touch" Valve is made of stainless steel, 7" length, mounted 10" above lowest fountain bowl, and comes standard with bottom security panel assembled with four tamper-resistant screws.

Option Thumbnail
Filtrine Model VPA "Vandal-Proof" Water Bottle Filler with "Soft-Touch" Valve



Filtrine Model F-502 Projector Water Bubbler is stainless steel, controlled by the separate "Soft-Touch" Bubbler Valve (included, only available in mirror finish), multiple finishes available. Also available as Vandal Proof.

Option Thumbnail
Filtrine Model STV Vandal Proof Soft Touch Button Valve and F-502 Projector Water Bubbler

3. Other fountain options include bottle counters (only with fountains with cover plates and hands-free activation) and bottle rests.

4. Cover plates are important additions to your drinking fountain. They hide plumbing and protect the back wall. For easy access to plumbing, consider the installation of an optional access panel under your drinking fountain. Both cover plates and access panels are available in stainless steel or bronze, in a variety of finishes.

5. Other options include cane skirt (also known as a cane apron) fountain bowl support arm designed for the visually impaired, is ADA compliant and is installed on non-recessed double fountains (Filtrine HL Models) on the high fountain (Filtrine Model LS). Unlike the competitors' equipment, Filtrine's cane apron/cane skirts are a durable permanent installation. For extra tamper resistance, and optional vandal-proof security panel can be added under the fountain support arm.

See the Vandal-Proof non-recessed drinking fountain models if your applications require tamper-resistant equipment.

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine