Filtrine 108-WD-HL Drinking Fountain

Wall Mounted, Filtrine Designer Series, Wood Deck/ Bronze Bowl, High/Low


Inspired by wood found in New Hampshire and access to some of the finest furniture makers in New England, Filtrine has created the Model 108-WD-HL drinking water fountain. The two 10” diameter bowls are made of bronze, encircled by cherry wood and finished with impermeable tung oil for an overall diameter of 14”. This fountain model joins the Filtrine Designer Series Fountain Collection which also features the Model 107-T, Model 107-MA, 108-WD and the Filtrine alcove drinking fountain model line. For another unique sophisticated look, architects have specified classic Filtrine fountain bowls to be made of other materials such as Corian in addition to the popular stainless steel and bronze.

Select Your Configuration Options:


Fountain Controls, Bottle Fillers, Cover Plates, Tamper-resistant, etc.

Bronze Finishes

Stainless Steel Finishes


The Model 108-WD-HL is a wall-mounted high/low drinking water fountain. The [2] 10” diameter 16 ga. round bowls have integral drains. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. Filtrine also offers the wood circle in Mahogany, Teak, Bamboo (used where sustainability is a priority) and Walnut. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. Filtrine’s 108-WD meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.


Receptor: [2] 10” diameter bowls set into 2” x 1-1/4” wood rings (overall diameter 14”) in 16 ga bronze

Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile

Support Arm: 14 ga, 4-3/8” wide by 2-5/8” high. Overall fountain height 3-3/4”

Mounting Plate: Made of a 1/4” steel plate, 31-1/2″W x 10-1/2″H or 20-1/2” high with the optional bottle filler, and a 3/8” steel tongue projecting into support arm

Cover Plate: Made of 16 ga stainless steel or bronze, 32″W x 16″H (or 21″H with optional bottle filler)

Related Applications