This space-saving unit combines two of Filtrine's most popular water dispensers all in one, the B103 Water Bottle Filling Station (the original in-wall bottle filler), and the non-recessed 107-14-HL drinking fountain. The Model B103-107-14-MOD-HL-HF is fully hands free. The "Hands Free" bubbler sensor activates when hand or body comes within range. The "Hands Free" bottle filler sensor activates when the water bottle is held under the dispenser. Filtrine's contemporary stainless construction and sleek profile provides an attractive, durable addition to any interior and allows for easy cleaning. Includes an access panel below for easy maintenance.
♿ ADA Compliant
Select Your Configuration Options:
Each Model B103 is constructed with a one-piece cover plate. The exterior is made without seams, exposed edges or screws. The 107-14 16 ga. 16” diameter stainless steel or bronze round bowl has an integral drain. Overall fountain height of 3-1/4” includes bowl and support arm. Both include touchless operation and are available with limitless finish options, permanent “Hands Free” labels, and ability to fit in a standard 4″ wall. The B103-107-14-MOD-HL-HF includes an access panel for easy plumbing access.
Receptors: Fountain: 14” diameter with seamless double bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius in 16 gauge
Underbowls: Raised from support arm by 1/2″ collar
Support Arms: 4-3/8” wide by 2-5/8” high in 14 gauge
Mounting Plate: 1/4” steel plate 15-1/2” high for vertical strength, 31-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate: Made of 16 ga stainless steel or bronze, 32″W x 3/8″D x 28″H, and fits over mounting plate.
Access Panel: Made of 16 ga stainless steel or bronze, 32″W x 3/8″D x 6″H, and sits below the mounting plate.
“Hands Free” Sensors: Help prevent germ transmission and water waste. Includes sensor, solenoid valve, battery pack, flow-through regulator and circuit board to adjust sensor distance.  lithium AA batteries run for approximately 400,000 activation cycles.
Labels: Select from two designs, Hands Free in text or Waving Hand with Sensor. The permanent label adheres to fountain cover plate. See specification sheet for examples.
- Filtrine’s “Hands Free” Photo Gallery Video
- Filtrine’s “Hands Free” Fountain Retrofit Kit Installation Instructions Video
- Filtrine Drinking Water Equipment Guide
- Filtrine Water Bottle Filling Station Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- B103-107-14-MOD-HL-HF Specification Sheet
Civic & Culture
Unlimited finish options and colors ensure that the Filtrine drinking fountains/bottle filling stations in your building or museum will have the same aesthetic quality and beauty as the décor or the artifacts being displayed. Filtrine’s drinking fountains and bottle filling stations are architecturally designed and the most durable in the industry. No other manufacturer offers a wider variety of drinking fountain/bottle filling station models and materials, including solid bronze. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
Gyms & Fitness
Filtrine has long been the brand of choice for several national gym chains because of the proprietary drinking water chiller/purifier design (Model FC and FCC). The growing popularity of water bottle refilling at gyms increases the likelihood of peak demand times (multiple users filling their bottles before and after fitness classes). Filtrine drinking water chillers feature an immersion coil evaporator that allows for storage of a large volume of chilled water. Vandal proof and “Hands Free” models cut down on tampering and germ transmission.
Colleges & Universities
Filtrine drinking fountains/bottle filling stations can meet and exceed LEED, Living Building Challenge (LBC) Red List and other green architectural requirements. Sustainability is especially important to higher education. Many colleges and universities looking to reduce bottled water waste and energy costs. All Filtrine drinking fountains/bottle filling stations are available with “Hands Free” and manual water bottle filler options to allow for the use of refillable bottles. Additionally, Filtrine drinking water chillers utilize immersion coil evaporators which provide a higher capacity of chilled drinking water while saving energy over traditional cooling technologies.
Hospitality & Retail
The ability to match any décor makes the durable, beautiful Filtrine drinking fountains/bottle filling stations a dramatic feature either indoors or outdoors. Filtrine’s drinking water equipment graces hotel lobbies and retail outlets across the US and overseas. Whether the building is modern or historic, the wide variety of models, materials and finishes including bronze, stainless steel and more, are popular with architects and engineers. Operations are a breeze with “Hands Free”, vandal proof, electric water cooler and access panel options.
Office & Headquarters
Your office or headquarters interior design will be enhanced by a stylish and beautiful Filtrine drinking fountain and/or bottle filling station that can either blend into the background or stand out as an architecturally pleasing fixture. When Filtrine office building drinking water dispensing equipment is installed, employees are able to refill their personal bottles or glasses with chilled lead-free, great tasting water. Any Filtrine office drinking fountain/bottle filling station can be made “Hands Free”.
Filtrine offers a wide variety of drinking fountains and bottle filling stations that can be installed outdoors in parks and public spaces. This makes it easy to find the appropriate style of outdoor drinking fountain or bottle filling station model for arts and historic districts, downtowns and public squares. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”.
The wide variety of Filtrine drinking fountain and bottle filling station bronze finishes enhance many church, mosque or temple’s interior design. Filtrine’s unique solid bronze drinking fountains/bottle filling stations have long been sought by national religious institutions. Any Filtrine drinking fountain/bottle filling station can be made “Hands Free”. To deliver chilled fresh tasting purified water to multiple Filtrine drinking fountains/bottle filling stations, Filtrine remote chiller/purifiers are installed. They are hidden away behind the wall or in the ceiling.