Banner Image

Black Bar

Image
black background
Banner Title
FILTRINE FOUNTAIN COLLECTION
108-WD NON-RECESSED WOODEN AND BRONZE DRINKING WATER FOUNTAIN
Image
Filtrine Model 108-WD bronze and wooden drinking water fountain
Body

Inspired by wood found in New Hampshire and access to some of the finest furniture makers in New England, Filtrine has created the Model 108-WD drinking water fountain. The 10” diameter bowl is made of bronze and is encircled by cherry wood finished with impermeable tung oil for an overall diameter of 14”. This fountain model joins the Filtrine Fountain Collection which also features the Model 107-T, Model 107-MA and the Filtrine alcove drinking fountain model line. For another unique sophisticated look, architects have specified classic Filtrine fountain bowls to be made of other materials such as Corian in addition to the popular stainless steel and bronze.

Specifications
Options
Models
Finishes
Downloads
bold description

The Filtrine Model 108-WD drinking water fountain in the photo above is shown in satin finished bronze encircled by cherry wood and a matching finish ADA-compliant “Soft Touch” bubbler valve. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains.

Description

Description
The Model 108-WD is a wall-mounted drinking water fountain. The 10” diameter 16 ga. round bowl has an integral drain. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. Filtrine also offers the wood circle in Mahogany, Teak, Bamboo (used where sustainability is a priority) and Walnut. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. Filtrine’s 108-WD meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.

Details

Receptor
10” diameter set into 2” x 1 ¼” wood ring (overall diameter 14”) in 16 ga bronze
Underbowl
Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile
Support Arm
14 ga, 4-3/8” wide by 2-5/8” high. Overall fountain height 3-3/4”
Mounting Plate
Made of a 1/4” steel plate, 15 1/2"W x 10 1/2"H or 19 1/2” high with the optional bottle filler, and a 3/8” steel tongue projecting into support arm
Cover Plate
(Optional) Made of 16 ga stainless steel or bronze

V Engineering Bulletin

Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.

Drinking Water Finish Guide

Stainless Steel finishes

Mirror

Filtrine Drinking Water Mirror Stainless Finish

Satin

Filtrine Drinking Water Satin Stainless Finish

*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.

Stainless Steel Unlimited Powder Coat Color Options (examples shown on Filtrine Model 103 water bottle filing stations)

Filtrine Bottle Filling Station Powder Coat Colors

Bronze finishes

Mirror

Filtrine Drinking Water Mirror Bronze Finish

Satin

Filtrine Drinking Water Satin Bronze Finishe

Statuary

Filtrine Drinking Water Statuary Bronze Finish

Oil Rubbed

Filtrine Drinking Water Oil Rubbed Bronze Finish

As the finish samples shown above are only pictorial representations, Filtrine will be happy to send you a complimentary set of actual samples to help you with your design plans. Call 800-930-3367, use the contact form or email to order today.

Filtrine Drinking Fountains Finishes Sample Kit
Provide chilled fresh water from your filtrine water fountain with point of use electric water coolers or remote central chillers along with the appropriate filtration system for your application. Add bowls as needed for higher volume applications.

Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.

Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.

Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.

Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.

Customize your Filtrine drinking fountain with the following options.

1. The fountain controls are available in four different fixture options and can be made vandal proof. Select from stainless steel or bronze material, mirror finish (standard with stainless steel) or fixtures can be finished to match the bowl/cover plates.

fountain control option

150x-sensor-activator-option.png

Body

Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler, shown installed into Model 107-14 fountain cover plate

Option Thumbnail
Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler

288x-STV-valve-502-bubbler-option.png

Body

Filtrine Model F-502 Projector Water Bubbler is stainless steel, controlled by the separate "Soft-Touch" Bubbler Valve (included, only available in mirror finish), multiple finishes available

Option Thumbnail
Filtrine Model F-502 Projector Water Bubbler

288x-STV-VP-F-502-VP-option.png

Body

Filtrine Model F-502-VP "Vandal-Proof" Projector Water Bubbler is stainless steel, controlled by the separate "Soft-Touch" Bubbler Valve (included but only available in mirror finish) secured with tamper-proof screws, multiple finishes available

Option Thumbnail
Filtrine Model F-502-VP "Vandal-Proof" Projector Water Bubbler

2. Water bottle and glass fillers come in multiple configurations including vandal proof. Select from stainless steel in a mirror finish, or fixtures can be finished to match the bowl/cover plates.

150x-Bottle-Filler-F-519-L-option.png

Body

Filtrine Model F-519-L "Push Back" "Lever-Valve" Cold Water Glass Filler is stainless steel, 6 3/4" or 9 1/2" length, mounted 10" above lowest fountain bowl, on vertical surface. Has a red level valve for hot water dispensing, multiple finishes available.

Option Thumbnail
Filtrine Model F-519-L "Push Back" "Lever-Valve" Cold Water Glass Filler

3. Other fountain options include bottle counters (only with fountains with cover plates and hands-free activation) and bottle rests.

4. Cover plates are important additions to your drinking fountain. They hide plumbing and protect the back wall. For easy access to plumbing, consider the installation of an optional access panel under your drinking fountain. Both cover plates and access panels are available in stainless steel or bronze, in a variety of finishes.

150x-access-panel-option.png

Body

Filtrine optional drinking fountain access panel allows easy entry to plumbing hookups and trap. Finish to match fountain or optional cover plate.

Option Thumbnail
Filtrine Optional Drinking Fountain Access Panel

150x-cover-plate-option.png

Body

Filtrine Drinking Water Fountain Cover Plate is installed over the mounting plate and functions as a "splash guard" protecting the finish wall, and is made of 16 ga stainless steel or bronze, fits over mounting plate, secured by fountain arm. Multiple finishes available.

Option Thumbnail
Filtrine Drinking Water Fountain Cover Plate

5. Other options include cane skirt (also known as a cane apron) fountain bowl support arm designed for the visually impaired, is ADA compliant and is installed on non-recessed double fountains (Filtrine HL Models) on the high fountain (Filtrine Model LS). Unlike the competitors' equipment, Filtrine's cane apron/cane skirts are a durable permanent installation. For extra tamper resistance, and optional vandal-proof security panel can be added under the fountain support arm.

See the Vandal-Proof non-recessed drinking fountain models if your applications require tamper-resistant equipment.

150x-fountain-cane-skirt-option.png

Body

Filtrine Cane Apron/Long Skirt is a drinking fountain support arm for either double or single bowl ADA compliance in certain applications, multiple finishes available. Shown with a separate 107-14 fountain.

Option Thumbnail
Filtrine Cane Apron/Long Skirt Drinking Fountain Support Arm

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine