This unit combines two of Filtrine's most popular water dispensers in an all-in-one unit, the B103 Water Bottle Filling Station (the original in-wall bottle filler), and the non-recessed 107-16 drinking fountain with an In-Wall Taste Master Purifier® and no louver drinking water chiller. Along with promoting “green” practices among building occupants, the bottle filling station/drinking fountain is the sustainable alternative to traditional methods of serving water, and can be located almost anywhere. Unlike competitive products on the market, Filtrine's contemporary stainless construction and sleek profile provides an attractive, durable addition to any interior and allows for easy cleaning.
The Filtrine Model B103 drinking water filling station and 107-16 fountain in the photo above are shown in stainless steel with #4 satin finish and the mirror finish ADA-compliant “Soft Touch” flush mount push button. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine water filling stations. The Taste Master water purifier and no-fan chiller are installed in the cabinet below behind the locked door. Specify the heights based on your requirements.
Each Model B103 is constructed with a one-piece cover plate. The exterior is made without seams, exposed edges or screws. The 107-16 16 ga. 16” diameter stainless steel or bronze round bowl has an integral drain. Overall fountain height of 3-1/4” includes bowl and support arm. Both are available with limitless finish options, customized logos, and ability to fit in a standard 4" wall. The Taste Master Purifier (secured behind the locking hinged door) features 0.5 micron element to remove suspended solids, chlorine taste/odors and water-borne pathogens such as cysts. The no-fan chiller has a cooling capacity of 5 gph at 50°F.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.