Energy Efficient Chillers

Filtrine’s chiller design features the storage-method of cooling. Each Filtrine chiller has a chiller barrel that consists of a stainless steel storage tank with an immersed stainless steel evaporator. The capacity of the storage tank and length of the evaporator are sized to meet the heat removal requirements of the application. This takes advantage of the fly-wheel effect of cooling where the energy is stored in the coolant to produce consistent, reliable outlet temperature. Unlike most process chillers, the Filtrine chiller’s refrigerant circuit only cycles on when the coolant temperature in the tank needs cooling. This saves energy over conventional cooling systems. Contact your local chiller systems sales representative for more information or to request a quote.

Request a Quote
Find a Rep
Grid View List View 157-168 of 218

Filtrine One-Pass PC-1500S-180 Chiller

With 15 HP Compressor, 100 gal Storage Capacity
PC-1500S-180
Typical Filtrine Chiller from Model 150-1000
Capacity Outlet Temp
MBH* Watts °F °C
180.0 52755 68 20
150.0 43960 50 10
110.0 32238 30 -1

*1,000 BTUs per hour

Standard Dimensions:
104"W x 52"D x 70"H

Learn More

Filtrine PCP-1500-180-HX MRI Medical Heat Exchanger and Control Panel

Closed Loop Packaged Heat Exchanger for Philips Ingenia 1.5 Omega HP MRI
PCP-1500-180-HX
Filtrine Heat Enchanger and Control Panel
  • Ample storage to ensure consistent temperature under fluctuating loads
  • Built-in diagnostic gauges and controls
  • Process water filter protects clinac system
  • Cleanable plate and frame heat exchanger constructed of stainless steel plates with high efficiency heat transfer surface
Learn More

Filtrine PCP-1500-MEV-HX Proton Therapy System Medical Heat Exchanger & Control Panel

Closed Loop Packaged Heat Exchanger for MEVION S250 Proton Therapy Systems
PCP-1500-MEV-HX
Filtrine Heat Enchanger and Control Panel
  • Storage method of cooling
  • Cleanable plate and frame heat exchanger constructed of stainless steel plates with high efficiency heat transfer surface
Learn More

Filtrine PCP-1500-180-HX Linear Accelerator Medical Heat Exchanger & Control Panel

Closed Loop Packaged Heat Exchanger for (2) High Energy VARIAN Clinac 2100C/D, 2300C/D, 21EX, 23EX, iX, Trilogy, Novalis Tx, True Beam-STx Linear Accelerators
PCP-1500-180-HX
Filtrine Heat Enchanger and Control Panel
  • Ample storage to ensure consistent temperature under fluctuating loads
  • Built-in diagnostic gauges and controls
  • Process water filter protects clinac system
  • Cleanable plate and frame heat exchanger constructed of stainless steel plates with high efficiency heat transfer surface
Learn More

Filtrine SMS-1500-180 MRI Medical Chiller

Closed Loop Packaged Chiller for Siemens MAGNETOM Spectra MRI
SMS-1500E-180
Typical Filtrine Chiller from Model 150-1000
  • Large storage and cylinder head unloading
  • Uses "Ozone Safe - Low Global Warming Potential (GWP)" HFO refrigerant
  • Weather-resistant units have anodized aluminum and stainless steel exterior for a lifetime of service
Learn More

Filtrine PCP-1500G-180-DUC Linear Accelerator Medical Chiller

Closed Loop Packaged Chiller for (2) High Energy VARIAN Clinac 2100 C/D, 2300 C/D, 21EX, 23EX, IX, Trilogy, Novalis TX and True Beam Linear Accelerators
PCP-1500G-180-DUC
Filtrine Typical Large or Modular Chiller
  • Storage method of cooling
  • Uses "Ozone Safe - Low Global Warming Potential (GWP)" HFO refrigerant
  • Optional anodized aluminum and stainless steel exterior for a lifetime of service
Learn More

Filtrine Closed Loop PCP-1500G-720-M4 Modular Chiller

With FOUR 15 HP Compressors, 5 HP Pump, 540 gal Storage Capacity
PCP-1500G-720-M4
Filtrine Typical Large or Modular Chiller
Capacity Outlet Temp
MBH* Watts °F °C
720 211011 68 20
640 187565 55 13
560 164120 45 7

*1,000 BTUs per hour

Standard Dimensions:
Each module is 66"W x 56"D x 75"H

Learn More

Filtrine PCP-1500S-180-ARC Philips Achieva 1.5T MRI Medical Chiller

Closed Loop Split System Packaged Chiller for Philips Achieva 1.5T with 787 Gradient Amplifier MRIs
PCP-1500S-180-ARC
Filtrine Typical Split System Chiller
  • Glycol free design
  • Split system with an indoor unit and an outdoor unit in weather resistant housing
  • Storage method of cooling
  • Low profile condensing unit for low visibility - 52" high, may be concealed by parapet
  • Microprocessor-based controls available to interface with building monitoring systems
Learn More

Filtrine PCP-1500S-180-ARC Philips MRI Medical Chiller

Closed Loop Split System Packaged Chiller for Philips Achieva Quasar 3T and Dual 3T, Nova 1.5T and Dual 1.5T MRIs
PCP-1500S-180-ARC
Filtrine Typical Split System Chiller
  • Glycol free design
  • Split system with an indoor unit and an outdoor unit in weather resistant housing
  • Storage method of cooling
  • Low profile condensing unit for low visibility - 52" high, may be concealed by parapet
  • Microprocessor-based controls available to interface with building monitoring systems
Learn More

Filtrine PCP-1500S-180-ARC Linear Accelerator Medical Chiller

Closed Loop Split System Chiller for VARIAN Clinac [2] 2100 C/D Linear Accelerators
PCP-1500S-180-ARC
Filtrine Typical Split System Chiller
  • Glycol free design
  • Split system with an indoor unit and an outdoor unit in weather resistant housing
  • Storage method of cooling
  • Low profile condensing unit for low visibility - 52" high, may be concealed by parapet
  • Microprocessor-based controls available to interface with building monitoring systems
Learn More

Filtrine PCP-1500S-180-A-WP Philips 1.5T MRI Medical Chiller

Closed Loop Packaged Chiller for Philips Achieva 1.5T with 787 Gradient Amplifier MRI
PCP-1500S-180-A-WP
Typical Filtrine Chiller from Model 150-1000
  • Storage method of cooling
  • Uses "Ozone Safe - Low Global Warming Potential (GWP)" HFO refrigerant
  • Optional anodized aluminum and stainless steel exterior for a lifetime of service
Learn More

Filtrine PCP-1500S-180-A-WP Philips MRI Medical Chiller

Closed Loop Packaged Chiller for Philips Achieva 3.0T, Ingenia 1.5T, 3.0T with Gradient Amplifier MRIs
PCP-1500S-180-A-WP
Typical Filtrine Chiller from Model 150-1000
  • Storage method of cooling
  • Uses "Ozone Safe - Low Global Warming Potential (GWP)" HFO refrigerant
  • Optional anodized aluminum and stainless steel exterior for a lifetime of service
Learn More
157-168 of 218