This unique non-recessed fountain, the Model 107-T, features a stainless steel bowl set into a marble trapezoid deck. Marble comes in a variety of colors, so its rich, textured look and smooth shiny surface can add distinction to any interior. This fountain model joins the Filtrine Fountain Collection which also features the Model 108-WD, Model 107-MA and the Filtrine alcove drinking fountain model line. In addition, architects have specified Filtrine fountain bowls made of other materials such as corian. Other shapes are also available, contact Filtrine for more information.
The Filtrine Model 107-T drinking water fountain in the photo above is shown in satin finished stainless set into a marble trapezoid deck with an optional "Push Button" Model F-501 bubbler in a mirror finish. To be ADA-compliant, choose Filtrine's “Soft Touch” Bubbler Valve. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains.
The Model 107-T is a wall-mounted drinking water fountain. The 10” diameter 16 ga. round bowl has an integral drain. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. Choose whatever marble color you would like and Filtrine can source it for you. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. Filtrine’s 108-WD meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.