Banner Image

Water Drops

Image
1170 water drops
103MOD-HL FULLY-RECESSED HIGH/LOW DRINKING FOUNTAIN MODEL
Image
103MOD-HL drinking fountain
Body

This is the only drinking fountain available that projects both a high and a low stream of water into one receptacle. Filtrine's Patented "built-in" bubblers on either side of the fountain are only available with "SOFT TOUCH" valve activation. Fully-recessed profile is available with a BOTTLE FILLER and finish to match any interior design.

Specifications
Options
Models
Finishes
Downloads
Receptor
13-1/4” wide with integral drain and sump [16 gauge construction]
Mounting Plate
Mounting flange on either side with 3/16" holes, along with a 3/16" countersunk hole in top for stability.
Standard Features
Access panel below fountain for easy access to plumbing hook-ups

V Engineering Bulletin

Cut Sheet

Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.

Drinking Water Finish Guide

Stainless Steel finishes

Mirror

Filtrine Drinking Water Mirror Stainless Finish

Satin

Filtrine Drinking Water Satin Stainless Finish

*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.

Stainless Steel Unlimited Powder Coat Color Options (examples shown on Filtrine Model 103 water bottle filing stations)

Filtrine Bottle Filling Station Powder Coat Colors

Bronze finishes

Mirror

Filtrine Drinking Water Mirror Bronze Finish

Satin

Filtrine Drinking Water Satin Bronze Finishe

Statuary

Filtrine Drinking Water Statuary Bronze Finish

Oil Rubbed

Filtrine Drinking Water Oil Rubbed Bronze Finish

As the finish samples shown above are only pictorial representations, Filtrine will be happy to send you a complimentary set of actual samples to help you with your design plans. Call 800-930-3367, use the contact form or email to order today.

Filtrine Drinking Fountains Finishes Sample Kit
Provide chilled fresh water from your filtrine water fountain with point of use electric water coolers or remote central chillers along with the appropriate filtration system for your application. Add bowls as needed for higher volume applications.

Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.

Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.

Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.

Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.

Customize your Filtrine drinking fountain with the following options.

1. The fountain controls are available in four different fixture options and can be made vandal proof. Select from stainless steel or bronze material, mirror finish (standard with stainless steel) or fixtures can be finished to match the bowl/cover plates.

2. Water bottle and glass fillers come in multiple configurations including vandal proof. Select from stainless steel in a mirror finish, or fixtures can be finished to match the bowl/cover plates.

150x-Bottle-Filler-CC-153-option.png

Body

Filtrine Model CC-153-9 "Lever-Valve" Gooseneck Cold Water Glass Filler is stainless steel, 9 1/4" height, mounted on horizontal surface with a red level valve for hot water dispensing, multiple finishes available.

Option Thumbnail
Filtrine Model CC-153-9 "Lever-Valve" Gooseneck Cold Water Glass Filler

150x-Bottle-filler-F512-option.png

Body

Filtrine Model F-512 Cold Water Glass Filler is stainless steel, 3 1/4" length, mounted 10" above lowest fountain bowl, on vertical surface. Has a red level valve for hot water dispensing, multiple finishes available.

Option Thumbnail
Filtrine Model F-512 Cold Water Glass Filler

288x-STV-VP-F-512-VP-option.png

Body

Filtrine Model F-512-VP Water Bottle Filler is stainless steel, 3 1/4" length, mounted 10" above lowest fountain bowl on vertical surfaceand controlled by the separate "Vandal-Proof" "Soft-Touch" STV-VP Bubbler Valve (included, mirror finish only), multiple finishes available

Option Thumbnail
Filtrine Model F-512-VP Water Bottle Filler

3. Other fountain options include bottle counters (only with fountains with cover plates and hands-free activation) and bottle rests.

150x-bottle-counter-option.png

Body

Filtrine Drinking Water Bottle Counter with reflective LCD display with 8 large [8mm] digits, choice of four counter types, and more

Option Thumbnail
Filtrine Drinking Water Bottle Counter

4. Cover plates are important additions to your drinking fountain. They hide plumbing and protect the back wall. For easy access to plumbing, consider the installation of an optional access panel under your drinking fountain. Both cover plates and access panels are available in stainless steel or bronze, in a variety of finishes.

150x-access-panel-option.png

Body

Filtrine optional drinking fountain access panel allows easy entry to plumbing hookups and trap. Finish to match fountain or optional cover plate.

Option Thumbnail
Filtrine Optional Drinking Fountain Access Panel

5. Other options include cane skirt (also known as a cane apron) fountain bowl support arm designed for the visually impaired, is ADA compliant and is installed on non-recessed double fountains (Filtrine HL Models) on the high fountain (Filtrine Model LS). Unlike the competitors' equipment, Filtrine's cane apron/cane skirts are a durable permanent installation. For extra tamper resistance, and optional vandal-proof security panel can be added under the fountain support arm.

See the Vandal-Proof non-recessed drinking fountain models if your applications require tamper-resistant equipment.

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine