Filtrine PCP-2000G-230 MRI Medical Chiller

Closed Loop Packaged Chiller for GE SIGNA Artist/Optima MR450W 1.5T MRI

PCP-2000G-230

This Filtrine chiller recirculates clean coolant at a consistent temperature, pressure and flow rate, ideal to maintain the maximum MRI uptime. It is designed specifically to cool GE SIGNA Artist/Optima MR450W 1.5T MRI.

Filtrine PCP chillers feature the storage method of cooling with a large stainless steel tank and immersed stainless evaporator. The tank is sealed to prevent coolant evaporation or fouling. The integral pump recirculates the coolant to the medical equipment at the specified pressure and flow rate.

Specifications:

Condenser Models

Available in five standard configurations. A: Self-contained air cooled model should be installed in a well ventilated room. W: Water cooled model may be installed in a nonventilated room but requires a source of condenser cooling water. AR: Remote air cooled model may be installed in a nonventilated area with the condenser mounted outdoors. A-WP: Weather-resistant model would be installed completely outdoors.

“Fail Safe” Options

  • AS – Automatic Switchover to City Water: In case of pump or compressor failure, city water switchover solenoids are activated to allow for temporary cooling using city water.
  • HAHigh Ambient: For operation in ambients of 110°F or 120°F (specify) or altitudes up to 11,483 ft. (3500 m).
  • HTHigh Temperature Interlock: Thermostat lights warning if coolant temperature rises above safe high limit.
  • LFLow Flow Interlock: Flow switch lights a warning light if flow rate drops below safe low limit.
  • QCPQuick Connect Panel: Compact panel installs between chiller and equipment for instantaneous availability of autoswitchover to city water (optional), pressure gauges, temperature gauges, flow meter and in-line filter. Panel is complete with all valves, solenoids, bypass and drains installed.