Banner Image

Water Drops

1170 water drops
Filtrine Model FCC-B103-107-16 Water Bottle Filling Station/Drinking Fountain Combination With Taste Master Water Purifier and Chiller

This unit combines two of Filtrine's most popular water dispensers in an all-in-one unit, the B103 Water Bottle Filling Station (the original in-wall bottle filler), and the non-recessed 107-16 drinking fountain with an In-Wall Taste Master Purifier® and drinking water chiller. Along with promoting “green” practices among building occupants, the bottle filling station/drinking fountain is the sustainable alternative to traditional methods of serving water, and can be located almost anywhere. Unlike competitive products on the market, Filtrine's contemporary stainless construction and sleek profile provides an attractive, durable addition to any interior and allows for easy cleaning.

bold description

The Filtrine Model B103 drinking water filling station and 107-16 fountain in the photo above are shown in stainless steel with #4 satin finish and the mirror finish ADA-compliant “Soft Touch” flush mount push button. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine water filling stations. The Taste Master water purifier and chiller are installed in the cabinet below behind the louvered locked door. Specify the heights based on your requirements. 



Each Model B103 is constructed with a one-piece cover plate. The exterior is made without seams, exposed edges or screws. The 107-16 16 ga. 16” diameter stainless steel or bronze round bowl has an integral drain. Overall fountain height of 3-1/4” includes bowl and support arm. Both are available with limitless finish options, customized logos, and ability to fit in a standard 4" wall. The Taste Master Purifier (secured behind the locking hinged door) features 0.5 micron element to remove suspended solids, chlorine taste/odors and water-borne pathogens such as cysts. The chiller has a cooling capacity of 6 gph at 50°F.


16” diameter with seamless double bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius in 16 gauge
Raised from support arm by 1/2” collar
Support Arm
4-3/8” wide by 2-5/8” high in 14 gauge
Mounting Plate
1/4” steel plate 10-1/2” high for vertical strength, 15-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate
Made of 16 ga stainless steel or bronze, 32"W x 3/8"D x 28"H, and fits over mounting plate
Taste Master Purifier
56A Chiller

V Specifications Sheet

Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.

Drinking Water Finish Guide

Stainless Steel finishes


Filtrine Drinking Water Mirror Stainless Finish


Filtrine Drinking Water Satin Stainless Finish

*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.

Stainless Steel Unlimited Powder Coat Color Options (examples shown on Filtrine Model 103 water bottle filing stations)

Filtrine Bottle Filling Station Powder Coat Colors

Bronze finishes


Filtrine Drinking Water Mirror Bronze Finish


Filtrine Drinking Water Satin Bronze Finishe


Filtrine Drinking Water Statuary Bronze Finish

Oil Rubbed

Filtrine Drinking Water Oil Rubbed Bronze Finish

As the finish samples shown above are only pictorial representations, Filtrine will be happy to send you a complimentary set of actual samples to help you with your design plans. Call 800-930-3367, use the contact form or email to order today.

Filtrine Drinking Fountains Finishes Sample Kit
Provide chilled fresh water from your filtrine water fountain with point of use electric water coolers or remote central chillers along with the appropriate filtration system for your application. Add bowls as needed for higher volume applications.

Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.

Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.

Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.

Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.

Customize your Filtrine drinking fountain with the following options.

1. The fountain controls are available in four different fixture options and can be made vandal proof. Select from stainless steel or bronze material, mirror finish (standard with stainless steel) or fixtures can be finished to match the bowl/cover plates.

fountain control option



Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler, shown installed into Model 107-14 fountain cover plate

Option Thumbnail
Filtrine Vandal-proof “Hands-Free” Sensor Activated Bubbler



Filtrine Model F-502 Projector Water Bubbler is stainless steel, controlled by the separate "Soft-Touch" Bubbler Valve (included, only available in mirror finish), multiple finishes available

Option Thumbnail
Filtrine Model F-502 Projector Water Bubbler



Filtrine Model F-502-VP "Vandal-Proof" Projector Water Bubbler is stainless steel, controlled by the separate "Soft-Touch" Bubbler Valve (included but only available in mirror finish) secured with tamper-proof screws, multiple finishes available

Option Thumbnail
Filtrine Model F-502-VP "Vandal-Proof" Projector Water Bubbler

2. Water bottle and glass fillers come in multiple configurations including vandal proof. Select from stainless steel in a mirror finish, or fixtures can be finished to match the bowl/cover plates.

3. Other fountain options include bottle counters (only with fountains with cover plates and hands-free activation) and bottle rests.



Filtrine Drinking Water Bottle Counter with reflective LCD display with 8 large [8mm] digits, choice of four counter types, and more

Option Thumbnail
Filtrine Drinking Water Bottle Counter

4. Cover plates are important additions to your drinking fountain. They hide plumbing and protect the back wall. For easy access to plumbing, consider the installation of an optional access panel under your drinking fountain. Both cover plates and access panels are available in stainless steel or bronze, in a variety of finishes.

5. Other options include cane skirt (also known as a cane apron) fountain bowl support arm designed for the visually impaired, is ADA compliant and is installed on non-recessed double fountains (Filtrine HL Models) on the high fountain (Filtrine Model LS). Unlike the competitors' equipment, Filtrine's cane apron/cane skirts are a durable permanent installation. For extra tamper resistance, and optional vandal-proof security panel can be added under the fountain support arm.

See the Vandal-Proof non-recessed drinking fountain models if your applications require tamper-resistant equipment.



Filtrine "Vandal-Proof" Fountain Security Panel is made of 16 ga stainless steel for bottom of fountain arm(s)and is attached with four tamper-resistant screws.

Option Thumbnail
Filtrine "Vandal-Proof" Fountain Security Panel

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine