Filtrine PFS10DUP Point of Use (POU) Particulate Water Filter

Removes 5 Micron Particles, Flow Rate: 20 gpm


Particulate filters (PF) remove sediment and other suspended particles from drinking water and process water using cartridges made from thermally-bonded microfibers of polypropylene. "Graded-Depth" construction provide element fibers which are wound more tightly toward the core of the cartridge. Consequently, the entire depth of the filter element is used for more effective filtration and longer service life.

The filter elements do not rely on cartridge compression. Filtrine's exclusive "Dual-Seal" design ensures first-day effectiveness for the life of the element.


Filtrine’s Model PFS10DUP dual point of use particulate filter housings are constructed of heavy-duty stainless steel and are rated at 150 psi working pressure. Particulate filters are the ideal solution for water treatment when turbidity, particulates and suspended solids are present in the make up water.

For installation behind a wall or in an optional “locking” in-wall cabinet, see the In-wall Filter/Purifier Specification Sheet in the Downloads section.


The 5.0 micron filter, Filtrine’s Model PFS10-19-5.0-SP, removes sediment and other suspended particles using material made from thermally-bonded microfibers of polypropylene.

Flow Rate: 20 gpm

Overall Dimensions (in): 24 5/8H x 18W

Filter: [2] Housings [2] 5.0 micron spun poly elements

Water Conn. (In/Out: FPT): 1″

Installation Tips:

  • Allow 6″ of space under filters to facilitate element change.
  • Water line temperature should be a maximum of 180°F and a maximum pressure of 150 psi.

Filter Maintenance:

  • Replace element every 4 months or more often if required.

Related Applications