Temperature Gauges: For water entering and leaving equipment are dial-type, in Celsius and Fahrenheit, uses probe for maximum accuracy with no pressure drop.
Pressure Gauges: Dial-type, in psi and bar and generate no pressure drop.
Flow Meter: Analog type with moving indicator in liters and gallons per minute, for minimum pressure drop.
Filter: Bag-type, using 50 micron bag with less than 1 psi pressure drop when new. Filter located inside the panel; includes bypass piping to ensure easy filter element change.
Overall Pressure Drop: Through panel at 10 gpm flow is under 10 psi when filter is clean.
AS – Auto Switchover to City Water: Cooling is already piped for easy access to backup cooling. Power supplied from Filtrine medical chiller is 115/60/1. Switchover occurs on high temperature, low flow and power loss alarms.
HT – High Temperature Interlock: Signals warning light when coolant temperature exceeds high limit. (Located in Filtrine medical chiller.)
LF – Low Flow Interlock: Signals warning light upon loss of coolant flow [pump failure]. (Located in Filtrine medical chiller.)
UPS – Battery Backup: Helps prevent loss of glycol due to nuisance tripping during short power failure, brownout or generator testing.
Chiller Side: 3/4” FPT [19 mm] copper pipe (other sizes available)
Equipment Side: 3/4” FPT [19 mm]
Service Drain: 1/2” FPT [12.5 mm]
Constructed of enameled aluminum panels with stainless steel top and sides. Panel is removable without tools for access to valves and filter.
30″ [762 mm] W x 10″ [254 mm] D x 36″ [915 mm] H
Unit Weight: 110 lbs. [50 Kg]
Employing the signature Filtrine chiller storage-type cooling tank, Filtrine has been chilling medical equipment for over 20 years and is considered a leader in the industry. Starting with Picker, Filtrine now designs medical chillers for Elekta, GE Healthcare, Hitachi Medical Systems, Mevion Medical Systems, Philips Healthcare, Siemens, Siemens Petnet Solutions, Varian Medical Systems, and more.