Filtrine One-Pass PC-500G-48 Chiller
With 5 HP Compressor, 1 HP Pump, 50 gal Storage Capacity
Filtrine PC chillers are specifically designed for one-pass cooling. A high transfer immersion coil evaporator supplies maximum capacity at any flow rate with no pressure drop. Storage tank design permits close temperature control without short-cycling. Choose from two condenser configurations to match your specific site requirements. The PC-500G-48 is available with either an fan cooled condenser inside the chiller housing (PC-500G-48-A) or a water cooled condenser (PC-500G-48-W) for hookup to city or tower water.
PC - One-Pass Chillers - A completely packaged liquid chiller designed for applications where the liquid to be cooled passes through the chiller only once before either being added as an ingredient to a product or fouled by the product it is cooling. It is most important that a one-pass chiller be able to chill liquids at high and low flow rates without significant pressure drop or danger of freeze up, and yet have close, accurate temperature control.
- Energy saving design where the compressor only runs as needed
- Close temperature control
- Welded stainless steel cooling tank
- Uses “Ozone Safe – Low Global Warming Potential (GWP)” HFO refrigerant
Condenser Models: A, fan cooled condenser for indoor installation; AR, Remote Air cooled condenser furnished separately for mounting on roof; W, water cooled condenser for hookup to city or tower water; A-WP, Self-contained air cooled condenser; complete unit made weather-resistant for outdoor installation
Design the perfect cooling system for any application. See Options & Accessories.
Coolant Discharge Temperature: 68oF (20oC)
Ambient Temperature: 90oF (32oC)
Tank Capacity (Gal): 50
Compressor Motor (HP): 5
Circulating Pump (HP): 1
Cabinet Dimensions (in): 72″ (183 cm) W x 35″ (89 cm) D x 60″ (152 cm) H*
Shipping Weight (lbs): 1800 (810 kg)
*Dimensions are for the PC-500G-48-A model. Chiller dimensions and shipping weights may vary depending on options, contact your local Filtrine chiller representative for more information.
- Filtrine HCAI OSHPD Special Seismic Certification Preapproval (OSP) #OSP-0369
- Filtrine Process Liquid Chiller Guide
- Filtrine Chiller Options & Accessories
- Filtrine Heater and Chiller Options Specification Sheet
- Filtrine Other Coolant Interchanger (OCO) Option Specification Sheet
- Filtrine Chiller Model 664K-R407C Remote Air Cooled Condensers
- Filtrine Process Chiller PC-500G Chiller Specifications Sheet
Ensure accuracy of non-ferrous cooling circuits for electron microscopes, blood cooling, diﬀusion pumps, spectrometers, scanners, NMR magnets and many other sensitive devices with a Filtrine laboratory equipment chiller. Close temperature control and pure coolant are what Filtrine customers have come to expect with a Filtrine chiller.
The dissipated heat from water cooled lasers is removed by Filtrine chillers which provide water temperatures above the dew point to avoid condensation. Solid state controls provide temperature stability within ±0.5OF and an ambient tracking thermostat is included. An optional pure system ensures that deionized water coolant comes in contact with stainless steel or polypropylene only.
Oil & Gas
Either a Filtrine closed loop, open loop or one pass chiller can be made explosion proof. Filtrine explosion-proof chillers (Model XP) are manufactured to ensure that no spark will be released from the electrical components of the chiller that could ignite gases, dusts or chemicals that may be present. These chillers are built to meet NEC Standards for Class 1, Divisions 1 & 2 and Groups B, C or D hazardous locations.
Ensure accurate and safe operation when cooling fuels for ﬂash point or cloud point monitoring with Filtrine’s explosion proof chillers (Model XP) explosion-proof controls and motors (Group B, C & D). Stainless steel cabinet and copper coated condenser are included to protect against aggressive gases.