Banner Image

Water Drops

Image
1170 water drops
WCS-20-HL-HC INDESTRUCT PRISON ELECTRIC WATER COOLER
Image
Filtrine INDESTRUCT Model WCS-20-HL-HC Prison Electric Water Cooler
Body

Filtrine’s INDESTRUCT PRISON ELECTRIC WATER COOLERS are wall hung models with high/low bowls that are ADA compliant and wheelchair accessible. The cabinet comes with tamper-resistant access panels and the wheelchair extension is secured with tamper-proof screws. Specify either heavy duty 16 ga or 14 ga steel panels or bowls with integral drain in a #4 satin finish. The model includes a water chiller and a hot water heater with hot and cold drinking water dispensers.

Specifications
Options
Models
Finishes
Downloads
bold description

The Filtrine INDESTRUCT Model WCS-20-HL-HC dual bowl heavy duty electric water cooler in the illustration above is shown in 16 ga stainless steel with a #4 satin finish. The mirror finished bubblers are operated with "Push Button" valves. The two mirror finished gooseneck glass fillers are welded to the deck. This fixture is approved by the Federal Bureau of Prisons and is vandal-resistant.

Description

Description

The Model WCS-20-HL-HC drinking water fountain is attached with a 1/4" steel mounting plate bolted through the wall and 3/8" steel support arms. The stainless steel storage tank has an immersion coil evaporator and holds 2 gallons of chilled water with a 12 gallon capacity. The stainless steel insulated hot water tank has a 1.5 gallon capacity. Persons served is 96 per one hour peak.

Details

Standard Features
Plumbing Connections: Supply - 1/4" FPT, Drain - 1 1/4" FPT
Compressor Motor (HP)
1/5
Cooling Capacity
Cold - 12 gal/ Hot - 1.5 gal
Persons Served
96
Supply Power
115/60/1 (consult the factory for other voltages)
Tank Capacity (Gal)
Cold - 2 gal/Hot - 72 oz
Cabinet Dim D (In)
18 inches
Cabinet Dim H (In)
40 1/2 inches + 9" for the tallest gooseneck glass filler
Cabinet Dim W (In)
36 inches

V Specifications Sheet

Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.

Drinking Water Finish Guide

Stainless Steel finishes

Mirror

Filtrine Drinking Water Mirror Stainless Finish

Satin

Filtrine Drinking Water Satin Stainless Finish

*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.

Stainless Steel Unlimited Powder Coat Color Options (examples shown on Filtrine Model 103 water bottle filing stations)

Filtrine Bottle Filling Station Powder Coat Colors

Bronze finishes

Mirror

Filtrine Drinking Water Mirror Bronze Finish

Satin

Filtrine Drinking Water Satin Bronze Finishe

Statuary

Filtrine Drinking Water Statuary Bronze Finish

Oil Rubbed

Filtrine Drinking Water Oil Rubbed Bronze Finish

As the finish samples shown above are only pictorial representations, Filtrine will be happy to send you a complimentary set of actual samples to help you with your design plans. Call 800-930-3367, use the contact form or email to order today.

Filtrine Drinking Fountains Finishes Sample Kit
Provide chilled fresh water from your filtrine water fountain with point of use electric water coolers or remote central chillers along with the appropriate filtration system for your application. Add bowls as needed for higher volume applications.

Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.

Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.

Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.

Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.

Customize your Filtrine drinking fountain with the following options.

1. The fountain controls are available in four different fixture options and can be made vandal proof. Select from stainless steel or bronze material, mirror finish (standard with stainless steel) or fixtures can be finished to match the bowl/cover plates.

2. Water bottle and glass fillers come in multiple configurations including vandal proof. Select from stainless steel in a mirror finish, or fixtures can be finished to match the bowl/cover plates.

3. Other fountain options include bottle counters (only with fountains with cover plates and hands-free activation) and bottle rests.

4. Cover plates are important additions to your drinking fountain. They hide plumbing and protect the back wall. For easy access to plumbing, consider the installation of an optional access panel under your drinking fountain. Both cover plates and access panels are available in stainless steel or bronze, in a variety of finishes.

5. Other options include cane skirt (also known as a cane apron) fountain bowl support arm designed for the visually impaired, is ADA compliant and is installed on non-recessed double fountains (Filtrine HL Models) on the high fountain (Filtrine Model LS). Unlike the competitors' equipment, Filtrine's cane apron/cane skirts are a durable permanent installation. For extra tamper resistance, and optional vandal-proof security panel can be added under the fountain support arm.

See the Vandal-Proof non-recessed drinking fountain models if your applications require tamper-resistant equipment.