The elegant non-recessed fountain, Model 107-MA, is ringed by marble. Marble comes in a variety of colors, so its rich, textured look and smooth shiny surface can add distinction to any interior. The 10” diameter bowl is made of bronze and with the circle of marble the total diameter is 14”. This fountain model joins the Filtrine Fountain Collection which also features the Model 108-WD, Model 107-T and the Filtrine alcove drinking fountain model line. For another unique sophisticated look, architects have specified classic Filtrine fountain bowls made of other materials such as Corian in addition to the popular stainless steel and bronze.
The Filtrine Model 107-MA drinking water fountain in the photo above is shown in mirror finished bronze encircled by white marble with an optional "Push Button" Model F-501 bubbler in a matching finish. To be ADA-compliant, choose Filtrine's “Soft Touch” Bubbler Valve. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains.
The Model 107-MA is a wall-mounted drinking water fountain. The 10” diameter 16 ga. round bowl has an integral drain. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. Choose whatever marble color you would like and Filtrine can source it for you. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. Filtrine’s 108-MA meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.