Banner Image
REMOTE DRINKING WATER CHILLERS-HIDDEN FROM VIEW

Filtrine offers a wide variety of remote drinking water chillers to serve individual or multiple outlets. All models remove the chiller from the corridor, thereby increasing usable space and enhancing the aesthetics of the area.

Filtrine remote chillers are either equipped with a recirculating pump (for serving outlets more than 10-12 feet away), or without a recirculating pump for closer outlets. Recirculating pump chiller models allow for unlimited flexibility and maximum energy efficiency, as a single unit can supply cool purified water to every potable outlet.

Content_Body

In-Wall Drinking Water Chillers/Purifiers

Filtrine In-Wall Remote Drinking Water Chiller and Purifier

Filtrine's in-wall drinking water chiller/purifiers use no floor space, are easy to install and service. Each unit is engineered for quiet, efficient operation using Filtrine's exclusive storage tank with immersion coil evaporator and is easy to locate and install at any point within the circulating loop.. This design insures large quantities of pure, chilled water are available to meet peak demand requirements. Features include: compact design, as little as 10" of wall-depth required; dispenses water to 400 persons; quiet operation engineered for indoor environment; energy-saving design for low operating cost, hinged core grille with lock for easy access and security; grille in choice of finishes: stainless steel, bronze or color to suit.

Includes a Taste Master® purifier for water quality control.

Chiller Sizing Tips:

  1. Determine expected building/area population
  2. Determine expected piping allowance [total loop]
  3. Round population to the nearest [100] and select the appropriate chiller
  4. Locate the suggested total piping allowance for the selected chiller on the chart
  5. If necessary, reduce population served by 25 people per 50 ft of additional piping and move to a larger capacity chiller model.

In-Wall Recirculating Drinking Water Chillers/Purifiers Selection Chart

Models ES-2-RFC-IW - ES-8RFC-IW
Remote in-wall chiller/purifier for serving chilled/purifier water to dispensers via circulating chilled water loop (integral circulating pump).

Model Persons Served Piping Loop (ft.) Piping Loop (ips) Compressor (HP) Tank (Gal.) Pump (HP) Supply Power Spec. Sheet
ES-2-RFC-IW 100 100 1/2 1/5 2 1/50 115/60/1 FLA 6 [Typical] ES-IW [EB] 02.18.15.pdf
ES-4-RFC-IW 200 200 1/2 1/4 4 1/50 115/60/1 FLA 7 [Typical] ES-IW [EB] 02.18.15.pdf
ES-6-RFC-IW 300 300 1/2 1/3 6 1/25 115/60/1 FLA 9 [Typical] ES-IW [EB] 02.18.15.pdf
ES-8-RFC-IW 400 400 1/2 1/2 8 1/25 115/60/1 FLA 10 [Typical] ES-IW [EB] 02.18.15.pdf

In-Wall Non-Recirculating Drinking Water Chillers/Purifiers Selection Chart

Models ES-2-RF-IW - ES-8RF-IW
Remote in-wall chiller/purifier for serving chilled/purifier water to dispensers. 

Model Persons Served Piping Loop (ft.) Piping Loop (ips) Compressor (HP) Tank (Gal.) Pump (HP) Supply Power Spec. Sheet
ES-2-RF-IW 100 N/A N/A 1/5 2 N/A 115/60/1 FLA 6 [Typical] ES-IW [EB] 02.18.15.pdf
ES-4-RF-IW 200 N/A N/A 1/4 4 N/A 115/60/1 FLA 7 [Typical] ES-IW [EB] 02.18.15.pdf

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine