Filtrine’s Model 103-TM combines our classic recessed Model 103 drinking water fountain with a Taste Master® water purifier below. The in-wall round-back style drinking water fountain is designed for locations where space is limited. It is an integral unit that provides a distinctive statement without causing traffic problems in tight corridors. For a square-back style recessed drinking fountain, see Model 103-ALC.
The Filtrine Model 103-TM drinking water fountain, cover plate and access panel in the photo above is shown in satin finished stainless steel with a mirror finish "Push Button" bubbler and an optional lever valve gooseneck bottle filler. If your application's fountain control needs to be ADA-compliant, consider Filtrine's remote “Soft Touch” Bubbler Valve mounted on the front of the fountain. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains.
The Model 103-TM fountain is made in 16 gauge stainless steel or bronze, without seams, exposed edges or screws, and with outside corners square in one piece construction. The inside corners are rounded to a 1” radius with head clearance of 25” minimum to allow ambulatory use while meeting ADA height. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier is located behind access panel directly below fountain.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.