Particulate filters (PF) remove sediment and other suspended particles from drinking water and process water using cartridges made from thermally-bonded microfibers of polypropylene. "Graded-Depth" construction provide element fibers which are wound more tightly toward the core of the cartridge. Consequently, the entire depth of the filter element is used for more effective filtration and longer service life.
For process water applications, also consider the UV Water Sterilizer Models that are available as a standalone (Filtrine Model S) or, with a pre-filter particulate filter (Filtrine Model SF) or the Steri Flo Taste Master (Filtrine Model IL-SF-TM) which combines the particulate filter (PF) as a pre-filter with the Taste Master® (TM) purifier.
Particulate Point of Use Filters
Filtrine’s particulate point-of-use (Model PFS POU) 4 to 40 GPM filter housings are constructed of
heavy-duty stainless steel and are rated at 150 psi working pressure. They are built to outlast the
piping in the building. Particulate filters are the ideal solution for water treatment when turbidity,
particulates and suspended solids are present in the make up water.
Low and inexpensive maintenance is one of Filtrine’s primary goals, and we guarantee that our
element replacement procedure can be completed in less than 30 seconds and require no tools to
perform. Our competitors’ filters and housing come in a single unit that needs to be thrown away.
The environmentally friendly Filtrine filter/purifier configuration cuts down on waste, saving money
Point of use particulate filters can either be installed behind a wall or in an optional Filtrine “locking”
in-wall cabinet (Filtrine Model IW) with a locking hinged door under the fountain(s). Example shown
For high flow applications, consider Filtrine’s in-line Particulate filters (Model PF) so that water can
pass through two filters at once.
Particulate Point of Use Water Filters Selection Charts
Particulate (PF And PFS POU 4-40 GPM) Point of Use Water Filters
Flow rates from 4 to 40 GPM. Filtrine’s 5 micron particulate water filters are ideal for water treatment when turbidity, particulates and suspended solids are present in make-up water.
|Model||Flow Rate (GPM)||Overall Dimensions||Water Conn. (FPT)||Spec. Sheet|
|PFS4||4||8.5"L x 4"D||3/4" In/Out||PFS-POU (4-40 GPM) [EB].pdf|
|PFS6||6||13.5"L x 4"D||3/4" In/Out||PFS-POU (4-40 GPM) [EB].pdf|
|PFS10||10||24.5"L x 4"D||3/4" In/Out||PFS-POU (4-40 GPM) [EB].pdf|
|PFS10DUP||20||18"W x 24.625"H x 12"D||1" In/Out||PFS-POU (4-40 GPM) [EB].pdf|
|PFS10TRIP||30||18"W x 24.625"H x 12"D||1-1/4"||PFS-POU (4-40 GPM) [EB].pdf|
|PFS10QUAD||40||28.5"W x 24.625"H x 12"D||1-1/4" In/Out||PFS-POU (4-40 GPM) [EB].pdf|