Filtrine FC-107-16-VP Drinking Fountain
Wall-Mounted, Single Bowl, Tamper Resistant, Purifier/No-Fan Chiller
This vandal proof model combines our sleek 107-16 fountain with a vandal proof bottle filler (along with other vandal proof features) and a no louver chiller/purifier in the wall below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features a seamless bowl. The chiller stores (2) gallons of chilled/purified water (serving a population of 100). The Taste Master® water purifier with carbon block element removes particles, tastes, odors and water-borne pathogens. Matching key-lock access panel provides chiller/purifier access and security. Durable and beautiful, these fountains are available in a wide range of finishes and options including "Hands Free".
Select Your Configuration Options:
Specifications:
The Model FC-107-16-VP is a wall-mounted single bowl drinking water fountain. The 16” diameter 16 ga. round bowl has an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier and chiller are located behind access panel directly below fountain.
Filtrine’s FC-107-16-VP fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
Details
Receptor: 16 ga, 16” diameter seamless bowl design with welded rim, ground and polished to a finely tapered edge with 1/32” radius.
Underbowl: Raised from support arm by 1/2” collar to provide an aesthetically pleasing profile.
Support Arm: 4-3/8” wide by 2-5/8” high — in 14 gauge
Mounting Plate: 1/4” steel plate 20-1/2” high for vertical strength, 15-1/2” wide with 3/8”steel tongue projecting into support arm for maximum horizontal stability
Cover Plate: 16 ga stainless steel or bronze, 20″W x 3/8″D x 21″H, fits over mounting plate, secured by fountain arm
Purifier: Taste Master Purifier
Chiller: Wall-insert Model 66NL chiller with 2 gallon storage, charged with HFO R513A “Ozone Safe – Low GWP” refrigerant
Standard Features: Vandal proof 14 gauge stainless steel bottle filler, mounted on 3/8″ steel mounting tongue above lower bowl; soft touch button with set screw for security; matching bottom plate secured with “snake eye” screws
Videos
Downloads
- Filtrine Drinking Water Equipment Guide
- Filtrine “Hands Free” Drinking Water Equipment Guide
- Filtrine Drinking Fountain Finishes Guide
- Filtrine NSF-ANSI 372 Lead-Free Compliant Intertek Test Report
- FC-107-16-VP Specification Sheet
- Filtrine Fountain Chiller Inserts
- Filtrine Model FC/FCC Drinking Fountain Alternative Installation