This vandal proof model combines our classic high/low 107-14 fountain with a vandal proof bottle filler (along with other vandal proof options) and a no louver chiller/purifier in the wall below. Made in your choice of 16 gauge stainless steel or bronze, with 14 gauge support arms, the fountain features seamless double bowls. The chiller stores (2) gallons of chilled/purified water (serving a population of 100), and features an innovative static condenser for a whisper-quiet operation. The Taste Master® water purifier with carbon block element removes particles, tastes, odors and water-borne pathogens. Matching key-lock access panel provides chiller/purifier access and security. Durable and practical, these fountains, cover plates and access panels are available in a wide range of finishes and options.
The Filtrine Model FC-107-14-HL-VP drinking water fountain, cover plate and access panel in the photo above is shown in satin finished stainless steel with a matching finish ADA-compliant “Soft Touch” Bubbler Valve. The valve requires less than 5 lbs. to operate and comes standard with all Filtrine fountains. For an alternative bowl design, consider Filtrine’s Model FCC-107-16-HL-VP.
The Model FC-107-14-HL-VP is a wall-mounted dual bowl drinking water fountain. The 14” diameter 16 ga. round bowls each have an integral drain. Overall fountain height is 3-1/4”. The hand-polished bronze finish comes in either #4 Satin (standard), or in #8 Mirror or Oil-Rubbed or Statuary Bronze. The hand-polished stainless steel drinking fountain and cover plate can be finished in your choice of either #4 Satin (standard), or #8 Mirror. The copper/brass waterways are 100% lead-free—NO PLASTIC TUBING/CONNECTORS ARE USED. The Filtrine Taste Master® water purifier and chiller are located behind access panel directly below fountain.
Filtrine’s FC-107-14-HL-VP fountain meets or exceeds ADA requirements for spout height, spout location, controls and clearances as specified in the Federal Register.
V Engineering Bulletin
Filtrine’s fountains and bottle filling stations are constructed of 16 ga stainless steel or bronze. Select from the following metal finishes for the fountain bowls and support arms, cover and access plates, and bubbler valves*. If the finishes shown below don’t match your decor or you are searching for a unique look, an unlimited amount of colors are available in powder coat for stainless steel.
*Note that the stainless steel “Soft-Touch” bubbler valve is only available in mirror finish.
Electric Water Cooler (EWC):Equip your fountain with a Filtrine point-of-use electric water cooler in a stainless steel in-wall cabinet with a locking hinged door underneath to cool your drinking water. Choose from louvered (Filtrine FCC Models) or non-louvered (Filtrine FC Models) in the finish of your choice. We can help you select the most economical chiller to fit your demand.
Drinking Water Purifier or Filter:Ensure that your drinking water is of high quality by adding either a Filtrine Taste Master® or Lead- Miser TM purifier, or a particulate filter secured in a stainless steel in-wall cabinet with a locking hinged door.
Double and Triple Fountain Bowls:Add a second or third fountain bowl for aesthetics or extra capacity. The Filtrine Model HL and Model HHL both include a cover plate. Electric water coolers (Filtrine Model FC and FCC) and filtration systems (Filtrine Model TM) are also available with the high/low and high/high/low drinking fountains.
Vandal Proof Drinking Fountains with Bottle Fillers:Filtrine offers multiple tamper proof features. The bubbler heads and “Soft Touch” valves are built with set screws to discourage tampering, or consider the optional vandal-proof “Hands-Free” sensor activated bubbler. The 14 ga stainless steel bottle filler is mounted on 3/8” steel arm above the low fountain with a bottom plate secured with “snake eye” screws for extra protection.