Banner Image


FIltrine's LeadMiser™water filtration elements meets the NSF/ANSI Standards 42 and 53 for removal of lead, sediment, organic tastes/odors, chlorine taste/odors and pathogens. The carbon block (a naturally occurring material) used in the LeadMiser purifier element is biodegradable. Filtrine's exclusive "Dual Seal" design ensures first-day effectiveness for the life of the element.


LeadMiser Point of User Purifiers

Filtrine LeadMiser Purifier for Point of UseFiltrine Purifier Cabinet Locking Door

Point of Use LeadMiser purifers (Model TM-L) can either be installed behind a wall or in an optional Filtrine
“locking” in-wall cabinet (Filtrine Model IW) with a locking hinged door under the fountain(s).
Example shown on left. Download In-Wall Purifier Literature.

Filtrine’s LeadMiser 0.8 to 3.5 GPM purifier housings are constructed of heavy-duty stainless steel and
are rated at 125 psi working pressure. They are built to outlast the piping in the building. LeadMiser
purifiers are the ideal solution for water treatment when lead removal is required.

Low and inexpensive maintenance is one of Filtrine’s primary goals, and we guarantee that our
element replacement procedure can be completed in less than 30 seconds and require no tools
to perform. The environmentally friendly Filtrine filter/purifier configuration cuts down on waste,
saving money over time.

For high flow applications, consider Filtrine’s in-line LeadMiser filters (Model IL-PFTM-L) so that
water can pass through two filters at once.

LeadMiser Point of Use Water Purifiers Selection Charts

0.5 Micron Leadmiser (LM and LMS) Point-of-Use Purifiers
Flow rates from 0.80 to 3.25 GPM. Remove LEAD, 0.5 micron particles, organic tastes/odors, chlorine taste/odor, pathogens.

Model Flow Rate (GPM) Overall Dimensions Water Conn. (FPT) Spec. Sheet
TMS1-0.5L 0.8 8.5"L x 4"D 3/4" LMS-POU (0.8 to 3.5 GPM) [EB].pdf
TMS2-0.5L 1.75 13.5"L x 4"D 3/4" LMS-POU (0.8 to 3.5 GPM) [EB].pdf
TMS3-0.5L 3.25 23.5"L x 4"D 3/4" LMS-POU (0.8 to 3.5 GPM) [EB].pdf

WARRANTY: Filtrine warrants to the original buyer that Filtrine drinking water equipment is free from defects in material and workmanship. The time period is specified in the manual shipped with the equipment.

Craftmanship is paramount at Filtrine. Each employee in production is rigorously trained to adhere to Filtrine’s high manufacturing standards. Shown here: Steve is setting up a piece of sheet metal in Filtrine's Strippit.
Steve setting up sheet metal on the strippit machine