Filtrine SMS-500G-70 CT Systems Medical Chiller

Closed Loop Packaged Chiller for Siemens Sensation 16, 40, 64 CT Systems

SMS-500G-70

This Filtrine chiller recirculates clean coolant at a consistent temperature, pressure and flow rate, ideal to maintain the maximum CT systems uptime. It is designed specifically to cool Siemens Sensation 16, 40, 64 CT systems.

Filtrine SMS chillers feature the storage method of cooling with a large stainless steel tank and immersed stainless evaporator. The tank is sealed to prevent coolant evaporation or fouling. The integral pump recirculates the coolant to the medical equipment at the specified pressure and flow rate.

Specifications:

Condenser Models

A: Self-contained air cooled condenser.
A-WP: Weather-resistant model would be installed completely outdoors. W: Water cooled condenser
AR: Remote air cooled condenser
ARC: Split system w/ remote air cooled condensing unit

“Fail Safe” Options

  • AS Automatic Switchover to City Water: In case of pump or compressor failure, city water switchover solenoids are activated to allow for temporary cooling using city water.
  • DPADual Pumps: Automatic switchover to backup pump on loss of coolant flow.
  • HT – High Temperature Interlock: Thermostat lights a warning if coolant temperature rises above safe high limit.
  • LLLow Level Interlock: Float switch in tank lights warning light if coolant level drops below safe low limit.
  • LFLow Flow Interlock: Flow switch lights a warning light if flow rate drops below safe low limit.
  • WP-GF – Weather-Resistant, Glycol-Free: For outdoor installation; chiller with in-line heater and circulating pump connecting to UPS stand-by electrical system. Insures recirculation of 50°F coolant even if power fails at below freezing temperatures.