Supply and install where shown on plans, wall mounted circular drinking fountain. Receptor to be 14” diameter with 1/8” radius rolled edge, concealed seam and integral drain. Support arm not to exceed 4-3/8” wide by 2-5/8” high. Overall fountain height not to exceed 3-1/4”. Bowl to be manufactured of 16 gauge ( ), hand polished to a ( ) finish with matching 14 gauge support arm. Bubbler to have matching finish with ( ) valve. All water contact surfaces shall be lead-free, stainless steel (brass bubbler and flow regulator not acceptable). Fountain shall include mounting plate with projecting 3/8”steel tongue to insure rigidity of fountain. Fountain shall include TasteMaster Purifier (with 0.5 activated carbon block element) located behind access panel in a wall box directly below fountain. Wall box to be manufactured of 16 gauge ( ), hand polished to a ( ) finish. Fountain shall have no nameplate, lettering or symbols of any kind. Drinking fountain shall be Model 107-14-TM as manufactured by Filtrine Mfg Co Keene, NH USA and carry a Lifetime Warranty.